Roller ShadesDrapery SystemsTraditional Drapery Track Systems Kirbé® Vertical Drapery SystemRoman ShadesWood BlindsTensioned ShadesCable Guided ShadesHorizontal Sheer BlindsPleated ShadesFashion Honeycomb Shades Traditional Drapery Track Systems View drapery fabric options View cornices and more design options Lutron drapery track systems provide a wide range of options to suit the needs of any application. Our systems allow for tracks up to 30 ft long, single or multi-bend curved tracks, manual-open override, track splicing, 90° curves, and much more. Drapery Track Catalog (PDF, 3.3 MB) Ripplefold style is named for the soft, consistent ripples created by the drapery as it hangs from the track. The drapery is constructed with Graber® snap tape that allows it to be snapped directly to the carriers on the track. Fullness of the drapery is determined by the spacing of the carriers in the track. Lutron ripplefold tracks are available in 3 fullness factors: 80%, 100% and 120%.

The straight track system is available in the following configurations: Single or dual track Right draw, left draw, center draw, and tandem systems (center draw) Standard single track with lengths up to 18 ft; curtain makers greenockup to 30 ft spliced; grommet curtain batonup to 60 ft for spliced, tandem systemsblackout curtains sunderland Curved tracks are available in a standard arc or by custom specifications.classic curtains manukau rd All Lutron drapery drives will accommodate a single curve or bend; roma blackout eyelet curtains

D145 or D175 drives are required for tracks with double curves or bends Standard arc: 90° bend with 20 in. (0.5 m) radius Custom: up to 90° bends are possible; curved radius must be 20 in. (0.5 m) or greatertiddliwinks curtains Center draw and single draw versions are availablenet curtain rod 300cm The draw style of your drapery is the direction in which the draperies open. The draw style determines where the stack back of the drapery will lay. Consider your application carefully when selecting a draw style. Tandem systems use 2 tracks, thereby having a drive unit at each end. This allows for longer, center draw systems (over 30 ft), or for center draw systems to operate heavier drapes. The accuracy of movement and speed control of Lutron drapery track drives allow 2 independent systems to work in unison for elegant, smooth movement.

Spliced, tandem systems have a maximum 60 ft length. Track Splicing is a convenient option for the shipment and installation of long drapery tracks. It allows for a drapery track to be shipped in 2 or 3 equal sections, and easily connected at the job site. Longer standard track lengths of up to 30 ft Shorter packaging and easier transportation of tracks to and on the job site The drapery track system is available with a manual open carrier for drapery fabric panels weighing up to 70 lbs. When manual force is applied to the drapery the master carrier releases, allowing the drapery to open. The Lutron patented spring release system is field-adjustable to customize force necessary to manually open drapery. The benefits of this option include: Open draperies during a power loss Prevent damage to the system if a user attempts to pull open the drapery, not realizing that the track is motorized Lutron offers single, dual, curved, single-tandem and dual-tandem drapery track systems in 3 different drive options, each with different weight capacities, to meet your window covering needs:

Carries draperies up to 105 lbs (47.6kg) across a track Features color-matched end caps, track splicing and manual open capability Allows for tracks up to 18 ft (5486 mm) in length, or up to 30 ft (9144 mm) using a splice Operates curved tracks with a single bend Available for pinch pleat and ripplefold drapery systems Carries draperies up to 145 lbs (67.8 kg) across a track Features color-matched end caps and track splicing Operates curved tracks with 1 or 2 bends Carries draperies up to 175 lbs (79.4 kg) Available in pinch pleat and ripplefold pleat styles Complete your project without any snags by knowing what your drive system can handle. Download the system capacities sheet (PDF) to view weight capacities as they relate to drapery type, system width, and straight or curved tracks.Evans curtains tracks offer the perfect combination of strength, quality and affordability, rivaling other manufacturers’ products, often at a much lower price.

Whichever product you choose, you’ll find them all low maintenance and easy to fit.Our service provides made to order curtain engineering, with the focus very much on engineering. If you’re looking for a smooth operator with excellent bendability that fits the tightest corners, our extensive range has everything you’ll need.• Made to order, arrives ready to fit, no component stock holding • Continuous smooth running, glides effortlessly • Easy to fit – components that are universal throughout the range • Superior bendability – reverse bending and continuous curving • Strong enough to hold curtains of any weight • Patented and guaranteed (Under correct installation and operating conditions) • Contract curtain fitting service available • Free of charge training for your own curtain fittersDownload a copy of the Track Systems PDF . Easyflow Drapery System is an additional feature for the existing drapery hardware of Forest Group.

It can be installed onto curtain tracks and gives a special design on a curtain. Find below the unique features of FES®: • Gentle, continuous fold drapery from beginning to end of track. • Hand drawn, cord drawn or motorised possibility. • Easy to take down and re-hang. • When ironed, the curtains will easily fall into folds again. • Stack-back takes less width than conventionally pleated drapes. • Quick and easy installation of the curtain utilising a metal press stud incorporated onto a tape that snaps on to the Easyflow Carriers situated in the track. • Maximum fabric weight: depends on the system used. • Can also be used in horizontally-curved tracks. • Master Carriers can handle Draw Rod. For help with estimating, please click here. • Highly efficient hand drawn system for all types of medium weight curtains. • Quick installation with “Smart Klick” brackets for wall and ceiling applications.

it can be curved and reverse curved using a 10cm radius or continuously curved. • Suitable for special window decoration as circular, arch and triangle window models. • Heavy duty klickable carriers – UV protected – for smooth and easy traversing. Offset shape for straight hanging pleats. • Can also be used for Easyflow. • Maximum fabric weight: 4 kg per metre. • Track finish: chromated powder coating with a factory applied patented dry lubricant. • Highly efficient corded system for all types of medium weight curtains. • Elegant hand drawn system for all types of medium weight systems. • Heavy duty hand drawn system for medium and heavy curtains. • Ideal for use with overlap masters and batons which can be mounted behind or in front of curtains. • Maximum fabric weight: 8 kg. • Heavy duty corded system for medium and heavy curtains. • Touch Impulse Technology, gently pulling the curtain to open or close (standard feature).

• Integrated Emergency Control ensures manual operation of the curtain in case of power failure. • Modular motor, different modules can be attached for various control options: radio frequency, switch, infrared, domotics, building/hotel automation, serial communication, Z-wave, etc. • Silent motor, speed: 15 cm/sec. • Full automatic setting of the limits. • Programming of intermediate positions possible. • Touch Impulse sensitivity adjustable in 2 positions. • Stack-back position programmable to every desired setting. • Touch Impulse function can be switched on and off. • 24 Volt DC Power Input, by using the 230 or 115 Volt ac adaptor (white). • Motor pulley connects motor and FMS track. • All KS brackets applicable. • Torque: 1.5 Nm. • Variable velocity with slow start and slow stop. • Smooth, belt driven motorised curtain track system. • Integrated emergency control in case of power failure.

• High Frequency Technolog. • Can be operated by Wall Switch, Remote Control (high frequency) or Time Switch (high frequency). • Quiet motor speed: 15 cm/sec. • Easy to connect to Building Automation systems. • Bi-directional Bus-controller available, which enables data feedback communication. • Available in 30, 45 and 60 Watt. • Torque: 1.2 Nm (30 Watt), 1.8 Nm (45 Watt), 2.3 (60 Watt). • Smooth running panel system. • Comes as 2, 3, 4 or 5 glide panel track. • Available length: 6 m (19’8”). • Manual or cord operation. • Curved pelmet profile available. • Elegant and trendy channel rod system. • Easy and quick assembly. • Rod available in 20 mm and 28 mm thickness. • Bendable both with an inside and outside corner with a 10cm radius (20mm rod) and 20cm radius (28mm). • Colours: black, chrome, white, bronze, stainless steel and gold. • Length: 5,80 metres. • Rail quality: aluminium, chromated, powder coated and anti-friction treated.